The coating will last at least one year. EzDrop 1000 has a maintenance kit to prolong the lifetime of the hydrophobic coating.
EzDrop 1000 adopts a fixed optical path length design instead of using a stepper motor to control the optical path length distance, so no calibration is required. However, in order to maintain the excellent performance of EzDrop 1000, we recommend performing maintenance once a year. (Nano-hydrophobic Coating maintenance kit, Cat No.: T01-000182-00)
The memory is around 32 GB and free space is shown in the System icon. When the memory is full, the EzDrop 1000 system will display a request as to whether the oldest records should be overwritten or not.
The smallest measurable volume is 1 μL.
EzDrop 1000 only can measure one sample in a single run.
No, there are no temperature or pH range restrictions for the EzDrop 1000.
The LED battery indicator shows the battery status.
-Battery Indicator: (Blue) Fully charged
-Battery Indicator: (Purple) Half charged
-Battery Indicator: (Red) Almost empty
-Battery Indicator: (Off) Empty
-Battery Indicator: (Blinking red) Partial charge
-Battery Indicator: (Continuous blue) Full charge
You can adjust aspiration and dispensing speed by rotating the speed control wheel and pressing the aspiration and dispensing buttons.
Yes, you can dispense liquid in gravity mode by pressing the dispensing button slightly (4~5 mm).
Reduced suction efficiency may be caused by a dirty or wet membrane filter or a low battery.