Blue-Ray Biotech Contact-Headquarter

Pipette Controller

  • How do I know the battery status?

The LED battery indicator shows the battery status.

Use Status

Battery Indicator

Battery Status



Fully charged


Half charged


Almost empty



Charging & operating during charging

Blinking red

Partial charged

Continuous blue

Fully charged

  • How do I adjust the speed of aspiration and dispensing?

You can adjust aspiration and dispensing speed by rotating the speed control wheel and press the aspiration and dispensing buttons.

  • Can I dispense liquid in gravity mode?

Yes, you can dispense liquid in gravity mode by pressing the dispensing button lightly (4~5 mm).

  • What is the possible reason for reduced suction efficiency of the BlueSwan?

Reduced suction efficiency may be caused by a dirty or wetted membrane filter or the low battery.

  • What can I do when the serological pipette in the BlueSwan is dripping?

Please check the following items.

  • The serological pipette is securely inserted in pipette holder.
  • The serological pipette holder and membrane filter is inserted correctly.
  • The serological pipette holder and pipette are intact.
  • The serological pipette is loose in the BlueSwan. What is the reason for this?

The serological pipette may be not inserted correctly into the BlueSwan or the pipette holder may be damaged.

  • Which battery is used in BlueSwan? What is the specification of the battery?


Lithium-ion polymer rechargeable battery


1100 mAh

Full Recharge Time

Approx. 4 hours

Number of Dispenses

Approx. 4500 times (with a 25 ml pipette)
  • What is the function of the protective hole?

When too much liquid gets into the filter by accident, it will flow into the circulating silicon tube inside the machine and spurt out from the protective hole. This unique and safety design can prevent the parts in the BlueSwan from corrosion and contamination.

  • Is the BlueSwan UV-resistant and autoclavable?
  • The housing of the BlueSwan is UV-resistant.
  • The PTFE filter, silicone pipette holder and polypropylene nose cone can be autoclaved (121°C, 1.2 kg/cm2 for 20 min).


  • How much does the BlueSwan weigh?

It weighs 180 g including the rechargeable battery.

  • Which membrane filters are used in BlueSwan?

 It is a hydrophobic polytetrafluoroethene (PTFE) filter with 0.2 µm pore size and is 25 mm in diameter.